[product_after_gallery]
Ceramicspeed Single Bearing
Original price was: AED549.00.AED329.00Current price is: AED329.00.
Easy Return/Exchange
Fast Delivery
100% Secure Payment
Genuine CeramicSpeed 61802 (6802) Coated single bearing, 15 x 24 x 5 mm, CeramicSpeed item 101226. Grade 3 silicon nitride balls on hardened races with CeramicSpeed’s 3-micron coating, hand-built in Denmark. Check the number on your old bearing before ordering.
The CeramicSpeed 61802 (6802) Coated is a single replacement bearing from the Danish company that made ceramic bearings a performance upgrade in cycling. Grade 3 silicon nitride balls run in hardened steel races, and on the Coated finish those races carry CeramicSpeed’s own 3-micron metallic coating for extra hardness and corrosion resistance. “61802C” on this page means 61802 Coated.
Every CeramicSpeed bearing is hand-built in Denmark and checked four times by hand before it leaves the factory. It is a like-for-like replacement for any 61802 / 6802 bearing, so a worn or rough bearing can be swapped for a CeramicSpeed one without changing anything else.
Check your bearing size before you order
61802 = 6802 = 15 mm bore × 24 mm outside diameter × 5 mm wide. Bearings are not interchangeable between sizes, so confirm yours first:
- Read the number. The size is printed on the seal of your existing bearing — look for 61802, 6802 or 6802-2RS.
- Measure it. 15 mm hole, 24 mm across the outside, 5 mm thick.
- Ask us. Send the make and model of your hub, bottom bracket or component and we will confirm the bearing size before you pay.
Coated or Standard?
CeramicSpeed makes the 61802 in two finishes. Both share the same balls, cage, grease and seals. The difference is the races.
| Coated — this one | Standard | |
|---|---|---|
| Races | Hardened steel with a 3-micron metallic coating on the entire race surface, inside and out | Hardened steel, polished groove |
| Race hardness | Coating is 75% harder than hardened steel | Hardened steel |
| Corrosion | High resistance to corrosion | Standard steel |
| Balls, cage, grease, seals | Identical | Identical |
Figures are CeramicSpeed’s own. CeramicSpeed is explicit that coated bearings still need regular lubrication — the coating does not make them maintenance-free.
What is inside
- Grade 3 silicon nitride balls, matched within microns to the races.
- Hardened steel races with an ultra-smooth polished groove — coated on this finish.
- Reinforced polyamide cage holding the balls in place.
- CeramicSpeed Blue Grease, a low-viscosity grease chosen to keep friction down and extend bearing life.
- Non-contact seals to keep dirt and moisture out without adding seal drag.
- Checked four times by hand during the build.
Why riders fit CeramicSpeed
CeramicSpeed claims its balls are 400% smoother, 128% harder and 58% lighter than the steel balls normally used in cycling bearings, and that its bearings last three to five times longer than industry standard. The practical result is lower friction, slightly better power transfer and a bearing that stays smooth for longer. CeramicSpeed single bearings are used across road, time trial, triathlon, track, cyclocross and MTB.
In the UAE the coating earns its keep: bikes here get washed often, ridden in humid coastal air and parked in dust, which is exactly where corrosion resistance on the races matters.
Specifications
| Brand | CeramicSpeed |
|---|---|
| Bearing | 61802 (6802) |
| Finish | Coated |
| CeramicSpeed item number | 101226 |
| Bore (inside diameter) | 15 mm |
| Outside diameter | 24 mm |
| Width | 5 mm |
| Balls | Grade 3 silicon nitride (Si3N4) |
| Races | Hardened steel, 3-micron metallic coating |
| Cage | Reinforced polyamide |
| Seals | Non-contact |
| Grease | CeramicSpeed Blue Grease, low viscosity |
| Weight | Approx. 7 g |
| Made in | Denmark, hand-built |
| Sold as | One bearing |
| Warranty | CeramicSpeed lifetime warranty on coated bearings, per CeramicSpeed |
Fitting and care
- Press bearings in with a proper bearing press that loads the correct race. Never hammer a bearing in — it damages the races and the balls.
- Clean the bearing seat before fitting and check it for wear.
- Keep up regular maintenance and lubrication. CeramicSpeed states this still applies to coated bearings.
Our workshop in Dubai can press out the old bearing and fit the new one for you.
Common questions
What does “61802C” mean?
61802 is the bearing size and the C stands for Coated. CeramicSpeed sells the 61802 in Standard and Coated finishes, and this is the Coated one, CeramicSpeed item 101226.
Is 61802 the same as 6802?
Yes. They are two names for the same bearing size, 15 x 24 x 5 mm. CeramicSpeed lists it as “61802 (6802)”. You will often see 6802-2RS printed on the seal of a steel bearing of the same size.
Will it fit my hub?
Only if your hub uses a 15 x 24 x 5 mm bearing. Many components use this size, but hubs and bottom brackets vary by model and year. Read the number on the old bearing, or send us your hub model and we will check.
Is Coated worth it over Standard?
The coated races are 75% harder than hardened steel and highly corrosion resistant, according to CeramicSpeed. For bikes that are washed often, ridden in humid coastal air or used in dust, that is the finish that holds up best. The balls, cage, grease and seals are the same on both.
Do ceramic bearings need maintenance?
Yes. CeramicSpeed is clear that coated bearings still need regular maintenance and lubrication. Keep them clean and greased and they last far longer.
How many do I need?
This listing is for one bearing. Hubs and other components usually use two or more, and not always of the same size, so count and check every bearing you plan to replace before ordering.
| Weight | 0.01 kg |
|---|---|
| Dimensions | N/A |
| Size | 61802C |
| Brand | Ceramicspeed |
| Bearing Size | 61802 (6802) |
| Dimensions | 15 x 24 x 5 mm |
| Finish | Coated |
| Ball Material | Grade 3 Silicon Nitride |
| Seals | Non-contact |
| Made In | Denmark |
Only logged in customers who have purchased this product may leave a review.
Bikeera stocks CeramicSpeed bearings UAE for road cyclists who want the lowest friction drivetrain on the market. CeramicSpeed is a Danish brand known for ceramic ball bearings, OSPW pulley systems, and bottom brackets. They develop products used by professional road cycling teams worldwide.
The OSPW Oversized Pulley Wheel system reduces rear derailleur friction through larger pulley wheels. This means less energy loss and more watt savings on every ride. The OSPW ADR Pulley for Shimano 9250/8150 is the latest version, compatible with Di2. Furthermore, the OSPW for SRAM Rival AXS works with 12-speed wireless groupsets.
In addition, CeramicSpeed single bearings upgrade individual contact points across the bike. Each bearing uses ceramic balls for lower friction and a longer service life. The BB86 bottom bracket also fits standard road frames with a press-fit shell. As a result, every pedal stroke transfers more power to the drivetrain.
Shop CeramicSpeed bearings UAE at Bikeera in Dubai. We also stock OSPW systems and bottom brackets for road cyclists across the UAE. Free delivery on orders over AED 150.
Related products
Supacaz Fly Bottle Cage Carbon
Price range: AED206.00 through AED229.00
Shimano Caliper Fixing Bolt C (10mm) Br-rs505
Original price was: AED39.00.AED31.00Current price is: AED31.00.
Reviews
There are no reviews yet.